SOUTHEAST ASIA CONSTRUCTION10 May 2021
New Potain MDT 489 crane offers high capacity with low operating costs

The new Potain MDT 489 topless crane from Manitowoc fills the gap between the manufacturer’s popular MDT 389 and new MDT 569 models and is ideal for large-scale construction and infrastructure projects, especially the installation of large, prefabricated components, as well as for shipyards and mines with heavy loads to handle.

The MDT 489 delivers a high capacity with a maximum load of 20 t or 25 t and a 80 m jib for broad coverage and reach on the jobsite. In addition, its compact configuration enables the crane to operate on tight and congested sites.

All components, save the slewing mechanism, can be transported in standard-sized shipping containers. According to Manitowoc, the rotating section of the MDT 489 can be transported in just nine containers – which is four or five fewer than needed for a typical crane of this size, decreasing transport cost and complexity, as well as making access to the jobsite much simpler.

The MDT 489 is also quick to assemble on the jobsite. With a 80 m jib and 50 m mast, assembly takes a maximum of two days and requires very little space.

The crane can be placed on a 6 m or 8 m cross base platform and assembled in various configurations to best use the space and equipment available on the jobsite. The jib has been designed for easy and efficient erection with built-in slinging points. The jib sections can be assembled in different configurations to offer jobsite flexibility according to the assist crane size and ground space available. The heaviest jib section weighs only 6.7 t. 

Latest Potain technologies

Using Manitowoc’s crane control system (CCS), the MDT 489 can be set up in just 15 minutes. Moreover, this feature promotes highly controlled and efficient operation throughout the crane’s time on the jobsite. The trolley offers two falls for fast duty-cycle lifting or four falls for heavy lifting.

The wire ropes for the trolley can be tensioned and then the sensor recalibrated simply by using a push-button inside the operator cab. This is ideal for long-term jobsites that require more frequent tensioning. Once the MDT 489 has completed its work on the jobsite, it can be quickly and easily disassembled, ready to make way for other cranes or move on to its next job.

Customers have the option of the new high-performance 110 HPL winch or the 150 HPL (the 132 HPL and 180 HPL are available for the North American market). Productivity is dramatically increased with the new 110 HPL winch, as lifting speeds are up to twice that of the older 100 LVF winch. This feature, in combination with new motor brake management and a new architecture that facilitates maintenance operations, means the 110 HPL winch speed up construction times, improve overall driving comfort and provide more precise load placement.

These performance improvements by the 110 HPL winch do not increase power consumption, and maintenance is easier, said Manitowoc. Additionally, with the Power Control functionality, it is possible to limit the maximum electric power required for the crane operation without impacting low-load and no-load working speeds.

Like all Potain CCS cranes, the MDT 489 is equipped with the CraneSTAR Diag solution. Potain‘s remote diagnostic tool allows the customer to consult the machine‘s activity in real time. Thanks in particular to the forecasting of maintenance operations and advanced diagnostic assistance, the customer optimises the availability of its cranes and the return on investment. The recovery of operating data allows the measurement of the crane utilisation and load rates in order to optimise productivity and operational efficiency on construction sites. 

The Potain MDT 489 topless crane combines the capacity necessary for large construction projects with a compact crane configuration for the tightest and most congested jobsites, enabling contractors to access more sites and complete the job efficiently and profitably.